EETI TOUCH CONTROLLER
EETI's resistive controllers grant an excellent compatibility with a wide variety of resistive sensors in the market. Proven controller performance is trusted by over 40 of the worlds major resistive sensor manufacturers. Identical pinhole location allows manufacturers to easily switch between 4 / 5 / 8 wire touch solutions.
- Superior touch response.
- eGalaxGesture supported.
- Most comprehensive driver support.
- USB & RS232 dual interface on Saturn Series.
- Excellent compatibility with standard resistive panels.
|Power Requirements||5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple)|
|Operating Temperature||-20 to 85 degrees Centigrade|
|Storage Temperature||-20 to 85 degrees Centigrade|
|Relative Humidity||95% at 60 degrees Centigrade|
|Protocol||RS232 No parity,8 data bits,1 stop bit,9600 baud(N,8,1,9600)|
|Resolution||2048 x 2048|
|Accuracy Tolerance||Max. +/- 0.5% tolerance|
|Report Rate||Max. 180 points/sec|
|Response Time||Max. 20 ms|
|Regulatory Approvals||FCC-B, CE|
|Panel Resistance||200 ~ 900 ohm (pin to pin on the same layer)|
|Green Cred||RoHS Compliant|
|O/S support||Windows, DOS, MAC, QNX, Android, Linux|
ETP-MER4040RPBG (ETP-MB-S4000RAGG) - 4 WIRE RS232 RESISTIVE CONTROLLER (cables sold seperately)
*** ETP-MER4040RPBG is the replacement for product name ETP-S4000RAGG, which is no longer available.***
- Product Code: ETP-S4000RAGG, ETP-MER4040RPBG
- Availability: In Stock
- Ex Tax: $21.00